Our Duro 4.5 can be modified to
include our Tamp/Blow Option creating a labeler that is capable of placing
labels into recessed panels or when direct contact with the product cannot
be achieved or is not desirable due to specific product characteristics.
Occasionally, tamp application may be required to properly apply labels
when the speed of the product is inconsistent resulting in poor label
application.
Duro 4.5 Tamp/Blow Labeler
Versatile:
With the Tamp Option, Labels are dispensed onto a custom vacuum pad
and held in place. When the PLC signals the presence of a product the
pneumatic cylinder extends,
tamping
the label onto the product. The cylinder then retracts and a new label
is fed onto the vacuum pad in preparation for the next cycle. With the
Tamp Option, the
 label
can be applied from above, below or from the side since the label is
held securely in place by the vacuum.
With the Tamp/Blow Option, the label
is also dispensed onto a vacuum pad. However, the pneumatic cylinder
is restricted from actually coming into contact with the product. As
the pneumatic cylinder reaches the end of its' travel a burst of air
"blows" the label onto the product. This type of application is useful
where direct contact with the product is not desirable or feasible of
the label position is in an area that is hard to reach.
Accurate: With a completely adjustable vacuum and
air pressure, the Duro 4.5 Tamp/Blow Labeler is capable of label
application to delicate products that may be damaged with other types
of labelers.
Easy to Operate:
The Duro 4.5 Tamp/Blow Labeler is a fully
automatic label applicator capable of applying labels to a variety of
products. Products to be labeled are sensed as they pass a photo eye. The
photo eye initiates a signal that is transmitted to the PLC. After a fully
adjustable delay, the label is dispensed onto vacuum pad and then the
label is applied to the passing product.
 Controls consist of a Main Power Switch,
a Web Feed Adjustment which controls the speed that the label is
dispensed, and a Touch Screen Operator Interface which provides
information and access to the Label Delay, Label Gap Delay, Batch Count
and more.
Click here to view more photos
of the Duro Tamp/Blow Pressure Sensitive Labeler.
Versatile • Accurate • Easy to Operate
If you
have special requirements or an unusual application we are able to make
design modifications that will meet your requirements. We accept
Visa, MasterCard, and Discover cards.
Give us a call today!
Show me more!
For
additional information contact:
In-Line
Labeling Equipment, Inc.
7282 Spa Road • Charleston, South Carolina 29418
(800) 465-4630 • (843) 569-2530 • Fax (843) 569-2531
E-mail: Sales Department
|
