Home Products Duro 4.5 Line Tamp/Blow

Duro 4.5 Tamp/Blow

Our Duro 4.5 can be modified to include our Tamp/Blow Option, creating a labeler that is capable of placing labels into recessed panels or when direct contact with the product cannot be achieved or is not desirable due to specific product characteristics. Occasionally, tamp application may be required to properly apply labels when the speed of the product is inconsistent resulting in poor label application.

Versatile: With the Tamp Option, Labels are dispensed onto a custom vacuum pad and held in place. When the PLC signals the presence of a product the pneumatic cylinder extends, tamping the label onto the product. The cylinder then retracts and a new label is fed onto the vacuum pad in preparation for the next cycle. With the Tamp Option, the WebMaster Duro 4.5 Tamp/Blow with applicator arm extendedlabel can be applied from above, below or from the side since the label is held securely in place by the vacuum.

Duro 4.5 Tamp/Blow

Our Duro 4.5 can be modified to include our Tamp/Blow Option, creating a labeler that is capable of placing labels into recessed panels or when direct contact with the product cannot be achieved or is not desirable due to specific product characteristics. Occasionally, tamp application may be required to properly apply labels when the speed of the product is inconsistent resulting in poor label application.

Versatile: With the Tamp Option, Labels are dispensed onto a custom vacuum pad and held in place. When the PLC signals the presence of a product the pneumatic cylinder extends, tamping the label onto the product. The cylinder then retracts and a new label is fed onto the vacuum pad in preparation for the next cycle. With the Tamp Option, the WebMaster Duro 4.5 Tamp/Blow with applicator arm extendedlabel can be applied from above, below or from the side since the label is held securely in place by the vacuum.

Duro 4.5 Tamp/Blow

Our Duro 4.5 can be modified to include our Tamp/Blow Option, creating a labeler that is capable of placing labels into recessed panels or when direct contact with the product cannot be achieved or is not desirable due to specific product characteristics. Occasionally, tamp application may be required to properly apply labels when the speed of the product is inconsistent resulting in poor label application.

Versatile: With the Tamp Option, Labels are dispensed onto a custom vacuum pad and held in place. When the PLC signals the presence of a product the pneumatic cylinder extends, tamping the label onto the product. The cylinder then retracts and a new label is fed onto the vacuum pad in preparation for the next cycle. With the Tamp Option, the WebMaster Duro 4.5 Tamp/Blow with applicator arm extendedlabel can be applied from above, below or from the side since the label is held securely in place by the vacuum.


With the Tamp/Blow Option, the label is also dispensed onto a vacuum pad. However, the pneumatic cylinder is restricted from actually coming into contact with the product. As the pneumatic cylinder reaches the end of its travel, a burst of air "blows" the label onto the product. This type of application is useful where direct contact with the product is not desirable or feasible if the label position is in an area that is hard to reach.

Accurate: With a completely adjustable vacuum and air pressure, the Duro 4.5 Tamp/Blow Labeler is capable of label application to delicate products that may be damaged with other types of labelers.

Easy to Operate: The Duro 4.5 Tamp/Blow Labeler is a fully automatic label applicator capable of applying labels to a variety of products. Products to be labeled are sensed as they pass a photo eye. The photo eye initiates a signal that is transmitted to the PLC. After a fully adjustable delay, the label is dispensed onto the vacuum pad and then the label is applied to the passing product.

Controls consist of a Main Power Switch, a Web Feed Adjustment, which controls the speed that the label is dispensed, and a Touch Screen Operator Interface, which provides information and access to the Label Delay, Label Gap Delay, Batch Count, and more.

  • For more information on the Duro 4.5 Tamp/Blow Labeler, view our brochure by clicking on the PDF link below.

 

 
Official YouTube Channel for In-Line Labeling Equipment